Utility Factory Setup; Figure 4-16. Utility Factory Setup Menu - Comtech EF Data SDM-9000 Installation And Operation Manual

Operation
SDM-9000 "TYPE"
Key:
ACCESS TO
SUBMENU

4.2.5.6 Utility Factory Setup

CAUTION
4–50
FUNCTION SELECT
VER: 6.1.1
CONDITIONAL OR
Parameter Information
OPTION-DEPENDENT

Figure 4-16. Utility Factory Setup Menu

This configuration is used for factory alignment. Factory setup should not
be changed by unauthorized persons. To do so may cause modem failure.
UTILITY FACTORY SET_UP
TX COURSE POWER TABLE ADJUST
TX FINE POWER TABLE ADJUST
TX FIXED POWER OFFSET
RX SIGNAL LEVEL CALIBRATION
MOD FLTS ENABLE
DEMOD FLTS ENABLE
TX INT FLTS ENABLE
RX INT FLTS ENABLE
TX MODULE RESET
RX MODULE RESET
INT MODULE RESET
ASSIGN TRANSMIT FILTERS
ASSIGN RECEIVE FILTERS
SDM-9000 Satellite Modem
UTILITY
Rev. 4