Comtech EF Data SDM-9000 Installation And Operation Manual page 225

SDM-9000 Satellite Modem
Interface Command:
Buffer Response:
Center
Receive Command:
Clock Response:
Phase
Status:
Response:
Baseband Command:
Loopback Response:
Status:
Response:
Interface Command:
Loopback Response:
Status:
Response:
Interface Command:
Loop Response:
Timing
Status:
Response:
Interface Command:
Coding Response:
Format
Transmit Status:
Response:
Interface Command:
Coding Response:
Format
Receive Status:
Response:
Scrambler Command:
Enable Response:
Status:
Response:
Descramble Command:
r Enable Response:
Status:
Response:
Transmit Command:
Data Fault Response:
Status:
Response:
Receive Command:
Data Fault Response:
Status:
Response:
Rev. 4
<add/IBC_'cr'
>add/IBC_'cr''lf']
<add/RCP_xxx'cr'
>add/RCP_xxx'cr''lf']
<add/RCP_'cr'
>add/RCP_xxx'cr''lf']
<add/BBL_xxx'cr'
>add/BBL_xxx'cr''lf']
<add/BBL_'cr'
>add/BBL_xxx'cr''lf']
<add/ILB_xxx'cr'
>add/ILB_xxx'cr''lf']
<add/ILB_'cr'
>add/ILB_xxx'cr''lf']
<add/ILT_xxx'cr'
>add/ILT_xxx'cr''lf']
<add/ILT_'cr'
>add/ILT_xxx'cr''lf']
<add/ICFT_xxxx'cr'
>add/ICFT_xxxx'cr''lf']
<add/ICFT_'cr'
>add/ICFT_xxxx'cr''lf']
<add/ICFR_xxxx'cr'
>add/ICFR_xxxx'cr''lf']
<add/ICFR_'cr'
>add/ICFR_xxxx'cr''lf']
<add/SE_xxx'cr'
>add/SE_xxx'cr''lf']
<add/SE_'cr'
>add/SE_xxx'cr''lf']
<add/DE_xxx'cr'
>add/DE_xxx'cr''lf']
<add/DE_'cr'
>add/DE_xxx'cr''lf']
<add/TDF_xxxx'cr'
>add/TDF_xxxx'cr''lf']
<add/TDF_'cr'
>add/TDF_xxxx'cr''lf']
<add/RDF_xxxx'cr'
>add/RDF_xxxx'cr''lf']
<add/RDF_'cr'
>add/RDF_xxxx'cr''lf']
Where: xxxx = NRM (normal clock phasing) or INV (inverted
clock phasing).
Where: xxx = ON or OFF.
Where: xxx = ON or OFF.
Where: xxx = ON or OFF.
Where: xxxx = AMI, B3ZS, or HDB3.
Where: xxxx = AMI, B3ZS, or HDB3.
Where: xxx = ON or OFF.
Where: xxx = ON or OFF.
Where: xxxx = NONE, DATA, or AIS.
Where: xxxx = NONE, DATA, or AIS.
Remote Control Operation
B–7