BinTec RS353j User Manual page 68

7 System Management
54
Field
ISDN Usage External
Active Sessions (SIF,
RTP, etc... )
Active IPSec Tunnels
Fields in the Physical Interfaces menu.
Field
Interface - Connection
Information - Link
Value
also displayed in brackets as a percentage.
Shows the number of active B channels and the maximum num-
ber of available B channels for external connections.
Displays the total of all SIF, TDRC, and IP load balancing ses-
sions.
Displays the number of currently active IPSec tunnels in relation
to the number of configured IPSec tunnels.
Value
The physical interfaces are listed here and their most important
settings are shown. The system also displays whether the inter-
face is connected or active.
Connection Information for Ethernet interfaces:
• IP address
• Netmask
Connection Information for ISDN interfaces:
• Configured
• Not configured
Connection Information for xDSL interfaces:
• Downstream/Upstream Line Speed
Connection Information for WLAN interfaces:
Access Point Mode:
• Operation Mode: Access Point or Off
• The channel used on this wireless module
• Number of connected clients
• Number of WDS links
• Software version of the wireless card
Connection Information for UMTS/LTE interfaces:
•
bintec elmeg GmbH
appears if no SIM card is inserted.
bintec RS Series