Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
In the NAT Configuration ->Specify original traffic menu, you can configure for which
data traffic NAT is to be used.
Fields in the menu Specify original traffic
Field
Service
Action
Protocol
Description
within the existing connection are allowed.
Description
Not for Type of traffic =
method =
,
.
Select one of the preconfigured services.
Possible values:
•
(default value)
•
Only for Type of traffic =
Select which data packets are to be excluded by NAT.
Possible values:
•
(default value): All the data packets that match the
following parameters that are to be configured (protocol,
source IP address/network mask, destination IP address/net-
mask, etc.) are excluded by NAT.
•
: All the data packets that do not match the
following parameters that are to be configured (protocol,
source IP address/network mask, destination IP address/net-
mask, etc.) are excluded by NAT.
Only for certain services.
Not for Type of traffic =
method =
,
. In this case UDP is automatically defined.
Select a protocol. According to the selected Service, different
protocols are available.
Possible values:
12 Networking
and NAT
or
and NAT
or
221
Hide quick links:
Advertisement
Table of Contents
