Table of Contents
Advertisement
12 Networking
238
Fields in the Basic Parameters menu.
Field
Class map
Description
Filter
Direction
High Priority Class
Description
Choose the class plan you want to create or edit.
Possible values:
•
(default value): You can create a new class plan with this
setting.
•
already been created, which you can select and edit. You can
add new filters.
Only for Class map =
Enter the name of the class plan.
Select an IP filter.
If the class plan is new, select the filter to be set at the first point
of the class plan.
If the class plan already exists, select the filter to be attached to
the class plan.
To select a filter, at least one filter must be configured in the
Networking->QoS->QoS Filter menu.
Select the direction of the data packets to be classified.
Possible values:
•
: Incoming data packets are assigned to the class
(Class ID) that is then to be defined.
•
(default value): Outgoing data packets are as-
signed to the class (Class ID) that is then to be defined.
•
: Incoming and outgoing data packets are assigned to
the class (Class ID) that is then to be defined.
Enable or disable the high priority class. If the high priority class
is active, the data packets are associated with the class with the
highest priority and priority 0 is set automatically.
The function is enabled with
bintec elmeg GmbH
: Shows a class plan that has
.
bintec RS Series
Hide quick links:
Advertisement
Table of Contents
