19 Local Services
440
Field
Description
Command Type
Event List
Event List Condition
Description
Enter your chosen designation for the action.
Select the desired action.
Possible values:
•
(default value): Your device is rebooted.
•
: The desired value is entered for a MIB variable.
•
: The status of an interface is modified.
•
: Only for devices with a wireless LAN. The
status of a WLAN-SSID is modified.
•
: A software update is initiated.
•
onto your device or backed up by your device.
•
: Accessibility of an IP address is checked.
•
deleted or entered.
•
LAN. A scan of the 5 GHz frequency band is performed.
•
LAN. A scan of the 5.8 GHz frequency range is performed.
•
controller. A Neighbor Scan is initiated by the WLAN network
controlled by the WLAN controller.
•
: Only for devices with a WLAN controller.
The status of a wireless network is modified.
•
radio module is modified.
Select the event list you want which has been created in Local
Services->Scheduling->Trigger.
For the selected chains of events, select how many of the con-
figured events must occur for the operation to be initiated.
Possible values:
•
(default value): The operation is initiated if all events oc-
cur.
bintec elmeg GmbH
: A configuration file is loaded
: A certificate is to be renewed,
: Only for devices with a wireless
: Only for devices with a wireless
: Only for devices with a WLAN
: The operating mode of a WLAN
bintec RS Series