bintec elmeg GmbH
bintec RS Series
Field
Source Port Range
Type
Description
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are
to
Only for Protocol =
,
In the first field, enter the source port to be checked, if applic-
able.
If a port number range is specified, in the second field enter the
last port of the port range. By default the field does not contain
an entry. If a value is displayed, this means that the previously
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are
to
Only for Protocol =
The Type field shows the class of ICMP messages, the Code
field specifies the type of message in greater detail.
Possible values:
•
(default value)
•
•
•
•
•
•
•
•
•
•
•
•
•
.
or
.
17 Firewall
395