Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Remote IP Address
UDP Source Port
UDP Destination Port
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field
Local IP Address
Hello Intervall
Description
Enter the fixed IP address of the LNS used as the destination
address for connections based on this profile.
The destination must be a device that can behave like an LNS.
Enter how the port number to be used as the source port for all
outgoing L2TP connections based on this profile is to be de-
termined.
By default, the Fixed option is disabled, which means that ports
are dynamically assigned to the connections that use this pro-
file.
If you want to enter a fixed port, enable the
lect this option if you encounter problems with the firewall or
NAT.
The available values are
Enter the destination port number to be used for all calls based
on this profile. The remote LNS that receives the call must mon-
itor this port on L2TP connections.
Possible values are
to
The default value is
Description
Enter the IP address to be used as the source address for all
L2TP connections based on this profile.
If this field is left empty, your device uses the IP address of the
interface used to reach the remote IP Address by the L2TP tun-
nel.
Enter the interval (in seconds) between the sending of two L2TP
HELLO messages. These messages are used to keep the tun-
nel open.
The available values are
option. Se-
to
.
.
(RFC 2661).
to
, the default value is
16 VPN
. The
363
Hide quick links:
Advertisement
Table of Contents
