BinTec RS353j User Manual page 191

bintec elmeg GmbH
bintec RS Series
Status
Offline
11.3.1.1 Edit
Choose the icon to edit existing entries.
You can also delete entries using the
ated again but shall not be configured.
Wireless LAN Controller
Fig. 68:
The data for wireless module 1 and wireless module 2 are displayed in the Wireless LAN
Controller->Slave AP configuration->Slave Access Points->
ing device has two wireless modules. With devices featuring a single wireless module, the
data for wireless module 1 are displayed.
The menu consists of the following fields:
Fields in the Access Point Settings menu.
Field
Device
Meaning
The AP is either administratively disabled or switched off or has
its power supply cut off etc.
icon. If you have deleted APs, these will be loc-
Slave AP configuration
->
Description
Displays the type of device for the AP.
11 Wireless LAN Controller
Slave Access Points
-> ->
menu if the correspond-
177