BinTec RS353j User Manual page 161

bintec elmeg GmbH
bintec RS Series
Field
Wireless Mode
Description
Select the wireless technology that the access point is to use.
Only for Operation Mode =
and Operation Band =
Operation Mode =
Possible values:
• : The device operates only in accordance with
802.11g. 802.11b clients have no access.
• : Your device operates only in accordance with
802.11b and forces all clients to adapt to it.
•
technology and operates according to either 802.11b or
802.11g.
•
ent technology and operates according to either 802.11b or
802.11g. Only a data rate of 1 and 2 mbps needs to be sup-
ported by all clients (basic rates). This mode is also needed
for Centrino clients if connection problems occur.
•
client technology and operates according to either 802.11b or
802.11g. The following applies for mixed-short: The data rates
5.5 and 11 mbps must be supported by all clients (basic
rates).
• : Your device operates according to either
802.11b, 802.11g or 802.11n.
• : Your device operates according to either
802.11g or 802.11n.
• : Your device operates only according to 802.11n.
For Operation Band =
,
Possible values:
• : The device operates only in accordance with
802.11a.
• : Your device operates only according to 802.11n.
• : Your device operates according to either
and Operation Band =
: Your device adapts to the client
: Your device adapts to the cli-
: Your device adapts to the
,
10 Wireless LAN
or for
,
147