Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Interface Traffic Condi-
tion
Transferred Traffic
Destination IP Address
Source IP Address
Status
Interval
Trials
Description
•
(default value): Incoming data traffic is monitored.
•
: Outgoing data traffic is monitored.
Only for Event Type
Select whether the value for data traffic must be
(default value) or
the value specified in
in order to initiate the operation.
Only for Event Type
Enter the desired value in kBytes for the data traffic to serve as
comparison.
The default value is .
Only for Event Type
Enter the IP address whose accessibility is to be checked.
Only for Event Type
Enter an IP address to be used as sender address for the ping
test.
Possible values:
•
(default value): The IP address of the interface
over which the ping is sent is automatically entered as sender
address.
•
: Enter the desired IP address in the input field.
Only for Event Type
Select whether Destination IP Address
(default value) or
tion.
Only for Event Type
Enter the time in Seconds after which a ping must be resent.
The default value is
seconds.
Only for Event Type
19 Local Services
must be
in order to initiate the opera-
437
Hide quick links:
Advertisement
Table of Contents
