BinTec RS353j User Manual page 295

bintec elmeg GmbH
bintec RS Series
Field
PPPoE Mode
PPPoE Ethernet Inter-
face
PPPoE Interfaces for
Multilink
User Name
Password
VLAN
VLAN ID
Always on
Description
Select whether you want to use a standard Internet connection
over PPPoE ( ) or your Internet access is to be set
up over several interfaces (
, you can connect several DSL connections from a pro-
vider over PPP as a static bundle in order to obtain more band-
width. Each of these DSL connections should use a separate
Ethernet connection for this. At the moment, many providers are
still in the process of preparing the PPPoE Multilink function.
For PPPoE Multilink, we recommend using your device's Ether-
net switch in Split-Port mode and to use a separate Ethernet in-
terface e.g. ,
If you also want to use an external modem for PPPoE Multilink,
you must run your device's Ethernet switch in Split-Port mode.
Only for PPPoE Mode =
Select the Ethernet interface specified for a standard PPPoE
connection.
If you want to use an external DSL modem, select the Ethernet
port to which the modem is connected.
When using the internal DSL modem, select here the EthoA in-
terface configured in WAN->ATM->Profiles->New.
Only for PPPoE Mode =
Select the interfaces you want to use for your Internet connec-
tion. Click the Add button to create new entries.
Enter the user name.
Enter the password.
Certain Internet service providers require a VLAN-ID. Activate
this function to be able to enter a value under VLAN ID.
Only if VLAN is enabled.
Enter the VLAN-ID that you received from your provider.
Select whether the interface should always be activated.
). If you choose
for each PPPoE connection.
15 WAN
281