Table of Contents
Advertisement
7 System Management
102
Field
Generate Private Key
SCEP URL
CA Certificate
Description
field. This file must be provided to the CA and the received
certificate must then be imported manually to your device.
•
: The key is requested from a CA using the Simple Cer-
tificate Enrolment Protocol.
Only for Mode =
Select an algorithm for key creation.
(default value) and
Also select the length of the key to be created.
Possible values:
,
Please note that a key with a length of 512 bits could be rated
as unsecure, whereas a key of 4096 bits not only needs a lot of
time to create, but also occupies a major share of the resources
during IPSec processing. A value of 768 or more is, however,
recommended and the default value is 1024 bits.
Only for Mode =
Enter the URL of the SCEP server, e.g. ht-
tp://scep.bintec-elmeg.com:8080/scep/scep.dll
Your CA administrator can provide you with the necessary data.
Only for Mode =
Select the CA certificate.
• In
: In CA Name, enter the name of the CA
certificate of the certification authority (CA) from which you
wish to request your certificate, e.g.
ministrator can provide you with the necessary data.
If no CA certificates are available, the device will first down-
load the CA certificate of the relevant CA. It then continues
with the enrolment process, provided no more important para-
meters are missing. In this case, it returns to the Generate
Certificate Request menu.
If the CA certificate does not contain a CRL distribution point
(Certificate Revocation List, CRL), and a certificate server is
bintec elmeg GmbH
are available.
,
,
,
,
. Your CA ad-
.
bintec RS Series
Hide quick links:
Advertisement
Table of Contents
