15 WAN
300
Field
Encryption
Callback Mode
Description
•
: Primarily run CHAP, otherwise PAP.
•
: Only run MS-CHAP version 1 (PPP Microsoft
Challenge Handshake Authentication Protocol).
•
: Primarily run CHAP, on denial then the
authentication protocol required by the connection partner.
(MSCHAP version 1 or 2 possible.)
•
: Run MS-CHAP version 2 only.
•
: Some providers use no authentication. In this case, se-
lect this option.
Only for Authentication =
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. This is only possible if
STAC or MS-STAC compression is not activated for the con-
nection. If Encryption is set, the remote terminal must also sup-
port it, otherwise a connection cannot be set up.
Possible values:
•
(default value): MPP encryption is not used.
•
: MPP encryption V2 with 128 bit is used to RFC
3078.
•
used as compatible with Microsoft and Cisco.
Select the Callback Mode function.
Possible values:
•
(default value): Your device does not call back.
•
: Select one of the following options:
•
partner to request a callback.
•
partner to request a callback via CBCP (Callback Control
Protocol). Needed for Windows clients.
•
: Select one of the following options:
•
mediately when requested to do so by the connection part-
ner.
bintec elmeg GmbH
: MPP encryption V2 with 128 bit is
: Your device calls the connection
: Your device calls the connection
: Your device calls back im-
bintec RS Series