10 Wireless LAN
146
Field
Bandwidth
Number of Spatial
Streams
Transmit Power
Fields in the menu Performance Settings
Description
Displays the second channel used.
For Operation Mode =
or
Not for Operation Band =
Select how many channels are to be used.
Possible values:
•
(default value): One channel with 20 MHz bandwidth
is used.
•
: Two channels each with 20 MHz bandwidth are
used. In the case one channel acts as a control channels and
the other as an expansion channel.
Not for Wireless Mode =
Select how many traffic flows are to be used in parallel.
Possible values:
•
: Two traffic flows are used.
•
: One traffic flow is used.
Select the maximum value for the radiated antenna power. The
actually radiated antenna power may be lower than the maxim-
um value set, depending on the data rate transmitted. The max-
imum value for Transmit Power is country-dependent.
Possible values:
•
(default value): The maximum antenna power is used.
•
•
•
•
•
•
bintec elmeg GmbH
bintec RS Series