Bridges; Br<X - BinTec RS353j User Manual

bintec elmeg GmbH
bintec RS Series
Values in the Client Links list
Field
AP MAC Address
Uptime
Signal dBm (RSSI1,
RSSI2, RSSI3)
Noise dBm
SNR dB
Data Rate mbps
Rate
Tx Packets
Rx Packets

22.6 Bridges

22.6.1 br<x>
In the Monitoring->Bridges-> br<x> menu, the current values of the configured bridges
are shown.
Monitoring Bridges
Fig. 217: ->
Values in the br<x> list
Field
MAC Address
Port
Description
Shows the MAC address of the client link partner.
Shows the time in hours, minutes and seconds for which the cli-
ent link in question is active.
Shows the received signal strength in dBm.
Shows the received noise strength in dBm.
Shows the signal quality in dB.
Shows the current clock rate of data received on this client link
in Mbps.
For each of the specified data rates, displays the values for Tx
Packets and Rx Packets.
Shows the total number of packets sent.
Shows the total number of packets received.
Description
Shows the MAC addresses of the associated bridge.
Shows the port on which the bridge is active.
22 Monitoring
523