10 Wireless LAN
160
Field
Allowed Addresses
Fields in the menu Bandwidth limitation for each WLAN client
Field
Rx Shaping
Tx Shaping
Fields in the menu Advanced Settings
Field
Beacon Period
DTIM Period
Description
The function is disabled by default.
Use Add to make entries and enter the MAC addresses (MAC
Address) of the clients to be permitted.
Description
Select a bandwidth limitation in the receive direction.
Possible values are
•
(default value)
•
up to
,
,
.
Select a bandwidth limitation in the transmit direction.
Possible values are
•
(default value)
•
up to
,
,
.
Description
Enter the time in milliseconds between the sending of two
beacons.
This value is transmitted in Beacon and Probe Response
Frames.
Possible values are
to
The default value is
ms.
Enter the interval for the Delivery Traffic Indication Message
(DTIM).
The DTIM field is a data field in transmitted beacons that in-
forms clients about the window to the next broadcast or multic-
ast transmission. If clients operate in power save mode, they
bintec elmeg GmbH
in single Mbit/s steps,
,
and
in single Mbit/s steps,
,
and
.
bintec RS Series