Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
End-to-End Send Inter-
val
End-to-End Pending
Requests
Loopback Segment
Segment Send Interval Only if Loopback Segment is enabled.
Segment Pending Re-
quests
Description
The function is enabled with
The function is disabled by default.
Only if Loopback End-to-End is enabled.
Enter the time in seconds after which a loopback cell is to be
sent.
Possible values are
to
The default value is 5.
Only if Loopback End-to-End is enabled.
Enter the number of directly consecutive loopback cells that
may fail to materialise before the connection is regarded as in-
terrupted ("down"). Possible values are
The default value is .
Select whether you want to activate the loopback test for the
segment connection (segment = connection of the local end-
point to the next connection point) of the VCC or VPC.
The function is enabled with
The function is disabled by default.
Enter the time in seconds after which a loopback cell is sent.
Possible values are
to
The default value is .
Only if Loopback Segment is enabled.
Enter the number of directly consecutive loopback cells that
may fail to materialise before the connection is regarded as in-
terrupted ("down").
Possible values are
to
The default value is .
.
.
to
.
.
.
.
15 WAN
319
Hide quick links:
Advertisement
Table of Contents
