Table of Contents
Advertisement
12 Networking
218
Networking
NAT
Fig. 90:
->
For every NAT interface, the
can be selected.
In addition,
for this interface.
Options in the menu NAT Interfaces
Field
NAT active
Loopback active
Silent Deny
PPTP Passthrough
NAT Interfaces
->
,
displays how many port forwarding rules were configured
Description
Select whether NAT is to be activated for the interface.
The function is disabled by default.
The NAT loopback function also enables network address trans-
lation for connectors whereby NAT is not activated. This is often
used in order to interpret queries from the LAN as if they were
coming from the WAN. You can use this to test the server ser-
vices.
The function is disabled by default.
Select whether IP packets are to be silently denied by NAT. If
this function is deactivated, the sender of the denied IP packet
is informed by means of an appropriate ICMP or TCP RST mes-
sage.
The function is disabled by default.
Select whether the setup and operation of several simultan-
eous, outgoing PPTP connections from hosts in the network are
also to be permitted if NAT is activated.
The function is disabled by default.
bintec elmeg GmbH
,
and
bintec RS Series
Hide quick links:
Advertisement
Table of Contents
