BinTec RS353j User Manual page 237

bintec elmeg GmbH
bintec RS Series
Field
Original Destination IP
Address/Netmask
Original Destination
Port/Range
Original Source IP Ad-
dress/Netmask
Original Source Port/
Range
Source Port/Range
Destination IP Ad-
dress/Netmask
Description
original data packets, as the case arises.
Only for Type of traffic =
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
Only for Type of traffic =
Service =
Enter the destination port or the destination port range of the
original data packets. The default setting
port is not specified.
Only for Type of traffic =
Enter the source IP address and corresponding netmask of the
original data packets, as the case arises.
Only for Type of traffic =
method = , Service =
tocol = , ,
Enter the source port of the original data packets. The default
setting means that the port remains unspecified.
If you select
you select
ous range of ports which will be a applied for filtering the outgo-
ing data traffic
Only for Type of traffic =
vice = and Protocol =
Enter the source port or the source port range of the original
data packets. The default setting
mains unspecified.
Only for Type of traffic =
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
and Protocol = , ,
means that the
and Pro-
you can specify a single port, if
you can specify a continu-
, ,
means that the port re-
and NAT method =
12 Networking
,
, NAT
, Ser-
or
223