BinTec RS353j User Manual page 25

bintec elmeg GmbH
bintec RS Series
LED Farbe
WLAN (only green
RS353jw)
green
green
green
USB green
green
LTE green
green
BRI green
green
LAN 1 bis 4: green
LINK/ACT
green
LAN 1 bis 4: green
Speed
orange
LAN 5: LINK/ green
ACT
green
LAN 5: Speed green
orange
Status Information
off No VDSL connection.
on WLAN connection established.
off Radio or all assigned VSS inactive
on (slowly VSS is active, no client connected
flashing)
on (fast flash- VSS is active, at least one client connected
ing)
on (flickering) VSS is active, at least one client connected,
active data traffic
flashing Data traffic via USB send / receive.
off No USB connection.
on LTE connection established.
flashing Data tgraffic via LTE send / receive.
off No LTE connection.
on D-channel is active.
flashing At least one B-channel is active.
off No ISDN connection.
on Ethernet connection established.
flashing Data traffic via Ethernet.
off No Ethernet connection.
on 1000 Mbits transfer rate.
on 100 Mbits transfer rate.
off 10 Mbits transfer rate.
on WAN-Ethernet connection established.
flashing Data via LAN 5 send / receive.
off No Ethernet connection.
on The device is connected to the WAN at
1000 Mbits.
on The device is connected to the WAN at 100
Mbits.
3 Installation
11