BinTec RS353j User Manual page 139

bintec elmeg GmbH
bintec RS Series
Field Description
• : GPRS is preferentially used; should
GPRS not be available, UMTS is used.
• : UMTS is preferentially used; should
UMTS not be available, GPRS is used.
• : Only LTE is used; should LTE be unavailable, no
connection is established.
•
ably used; should LTE be unavailable, UMTS is used, and if
UMTS is unavailable, GPRS is used.
•
and quality of the signal are insufficient with LTE then UMTS
is used.
•
and quality of the signal are insufficient with LTE then GPRS
is used.
•
the strength and quality of the signal are insufficient with LTE
then GPRS is used. If the strength and quality of the signal
are insufficient with GPRS then UMTS is used.
•
strength and quality of the signal are insufficient with UMTS
then LTE is used.
•
strength and quality of the signal are insufficient with UMTS
then GPRS is used.
•
If the strength and quality of the signal are insufficient with
UMTS then LTE is used. If the strength and quality of the sig-
nal are insufficient with LTE then GPRS is used.
•
strength and quality of the signal are insufficient with GPRS
then LTE is used.
•
strength and quality of the signal are insufficient with GPRS
then UMTS is used.
•
If the strength and quality of the signal are insufficient with
GPRS then LTE is used. If the strength and quality of the sig-
nal are insufficient with LTE then UMTS is used.
8 Physical Interfaces
: LTE is prefer-
: LTE is used. If the strength
: LTE is used. If the strength
: LTE is used. If
: UMTS is used. If the
: UMTS is used. If the
: UMTS is used.
: GPRS is used. If the
: GPRS is used. If the
: GPRS is used.
125