BinTec RS353j User Manual page 327

bintec elmeg GmbH
bintec RS Series
Field
Address Mode
IP Address/Netmask
MAC Address
DHCP MAC Address
DHCP Hostname
Description
The function is enabled with
The function is disabled by default.
Only for Type =
Select how an IP address is to be assigned to the interface.
Possible values:
• (default value): The interface is assigned a static IP
address in IP Address / Netmask.
• : An IP address is assigned to the interface dynamically
via DHCP.
Only for Address Mode =
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interfaces. Add new entries
with Add.
Enter a MAC address for the internal router interface of ATM
connection, e.g.
quired in special cases.
For Internet connections, it is sufficient to select the option Use
built-in (default setting). An address is used which is derived
from the MAC address of the
Only for Address Mode =
Enter the MAC address of the internal router interface of ATM
connection, e.g.
If your provider has assigned you an MAC address for DHCP,
enter this here.
You can also select the Use built-in option (default setting) An
address is used which is derived from the MAC address of the
.
Only for Address Mode =
If necessary, enter the host name registered with the provider to
be used by your device for DHCP requests.
.
. An entry is only re-
.
.
15 WAN
313