Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Administrative Status
Description
Peer Address
Peer ID
Internet Key Exchange Not available for devices in the WIxxxxn series. Those devices
Description
Select the status to which you wish to set the peer after saving
the peer configuration.
Possible values:
•
(default value): The peer is available for setting up a tunnel
immediately after saving the configuration.
•
: The peer is initially not available after the configuration
has been saved.
Enter a description of the peer that identifies it.
The maximum length of the entry is 255 characters.
Enter the official IP address of the peer or its resolvable host
name.
The entry can be omitted in certain configurations, whereby
your device then cannot initiate an IPSec connection.
Select the ID type and enter the peer ID.
This entry is not necessary in certain configurations.
The maximum length of the entry is 255 characters.
Possible ID types:
•
•
•
•
•
: Any string
On the peer device, this ID corresponds to the Local ID Value.
only support IKEv1.
Select the version of the Internet Exchange Protocol to be used.
Possible values:
•
(default value): Internet Key Exchange Protocol Ver-
16 VPN
: Any string
327
Hide quick links:
Advertisement
Table of Contents
