BinTec RS353j User Manual page 347

bintec elmeg GmbH
bintec RS Series
Field
Destination IP Ad-
dress/Netmask
Destination Port
The menu Advanced Settings consists of the following fields:
Fields in the menu Advanced IPSec Options
Field
Phase-1 Profile
Phase-2 Profile
Description
(= -1) means that the port remains unspecified.
Enter the destination IP address and corresponding netmask of
the data packets.
Only for Protocol = or
Enter the destination port of the data packets. The default set-
ting (= -1) means that the port remains unspecified.
Description
Select a profile for Phase 1. Besides user-defined profiles, pre-
defined profiles are available.
Possible values:
•
as standard in VPN->IPSec->Phase-1 Profiles
• : Uses a special profile which contains the
proposals for Phase 1 3DES/MD5, AES/MD5 and Blowfish/
MD5 regardless of the proposal selection in menu
VPN->IPSec->Phase-1 Profiles.
• : Uses a profile configured in menu
VPN->IPSec->Phase-1 Profiles for Phase 1.
Select a profile for Phase 2. Besides user-defined profiles, pre-
defined profiles are available.
Possible values:
•
as standard in VPN->IPSec->Phase-2 Profiles
• : Uses a special profile which contains the
proposals for Phase 2 3DES/MD5, AES-128/MD5 and Blow-
fish/MD5 regardless of the proposal selection in menu
VPN->IPSec->Phase-2 Profiles.
• : Uses a profile configured in menu
VPN->IPSec->Phase-2 Profiles for Phase 2.
: Uses the profile marked
: Uses the profile marked
16 VPN
333