Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Fields in the ATM Profiles Parameter menu.
Field
Provider
Description
ATM Interface
Type
Virtual Path Identifier
(VPI)
Virtual Channel Identi-
fier (VCI)
Description
Select one of the preconfigured ATM profiles for your provider
from the list or manually define the profile using
.
Only for Provider =
Enter the desired description for the connection.
Only if several ATM interfaces are available, e.g. if several inter-
faces are separately configured in devices with SHDSL.
Select the ATM interface that you wish to use for the connec-
tion.
Only for Provider =
Select the protocol for the ATM connection.
Possible values:
•
(EthoA) is used for the ATM connection (Permanent Virtual
Circuit, PVC).
•
ATM (RPoA) is used for the ATM connection (Permanent Vir-
tual Circuit, PVC).
•
: PPP over ATM (PPPoA) is used for the ATM
connection (Permanent Virtual Circuit, PVC).
Only for Provider =
Enter the VPI value of the ATM connection. The VPI is the iden-
tification number of the virtual path to be used. Note your pro-
vider's instructions.
Possible values are
to
The default value is .
Only for Provider =
Enter the VCI value of the ATM connection. The VCI is the iden-
(default value): Ethernet over ATM
: Routed Protocols over
.
15 WAN
311
Hide quick links:
Advertisement
Table of Contents
