Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Monitored GEO Zone
GEO Zone Status
Monitored Variable
Description
Possible values:
•
(default value): The operations configured and assigned
in Actions are initiated at specific points in time.
•
: The actions configured and assigned in Actions
are initiated when the defined MIB variables assumes the as-
signed values.
•
: Operations configured and assigned in
Actions are initiated, when the defined interfaces take on a
specified status.
•
: The operations configured and as-
signed in Actions are triggered if the data traffic on the spe-
cified interfaces falls below or exceed the defined value.
•
: the operations configured and assigned in Ac-
tions are triggered if the defined IP address is accessible or
not accessible.
•
signed in Actions are initiated when the defined period of
validity is reached.
•
: Operations configured and assigned in
Actions are initiated, when the defined GEO Zones take on a
specified status.
Only for Event Type
Select a GEO zone configured in the Physical Interfaces
menu.
Only for Event Type
Select the GEO Zone Status.
Possible values:
•
: The current position lies within the defined zone.
•
: The current position lies outside the defined zone.
Only for Event Type
Select the MIB variable whose defined value is to be configured
as initiator. First, select the System in which the MIB variable is
saved, then the MIB Table and finally the MIB Variable itself.
19 Local Services
: Operations configured and as-
435
Hide quick links:
Advertisement
Table of Contents
