bintec elmeg GmbH
bintec RS Series
Field
Description
Service
Protocol
Type
Connection State
Destination IP Ad-
Description
Enter the name of the filter.
Select one of the preconfigured services. The extensive range
of services configured ex works includes the following:
•
•
•
•
•
•
•
•
The default value is
Select a protocol.
The
option (default value) matches any protocol.
Only for Protocol =
Select the type.
Possible values:
,
,
,
,
See RFC 792.
The default value is
.
With Protocol =
, you can define a filter that takes the
status of the TCP connections into account.
Possible values:
•
: All TCP packets that would not open any new
TCP connection on routing over the gateway match the filter.
•
(default value): All TCP packets match the filter.
Enter the destination IP address of the data packets and the
12 Networking
.
,
,
,
.
,
235