BinTec RS353j User Manual page 101

bintec elmeg GmbH
bintec RS Series
Field
Entry active
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field
Policy
TCP Port
Timeout
Description
authentication. If no response is given or access is denied (only
if Policy =
highest priority is used.
The available values are
Select whether this server is to be used for login authentication.
The function is activated by selecting
The function is enabled by default.
Description
Select the interpretation of the TACACS+ response.
Possible values:
•
ers are queried in order of their priority (see Priority) until a
positive response is received or a negative response has
been received from an authoritative server.
• : A negative response to a request is accep-
ted, i.e. a request is not sent to another TACACS+ server.
The device's internal user administration is not turned off by
TACACS+. It is checked after all TACACS+ servers have been
queried.
Shows the default TCP port (
tocol. The value cannot be changed.
Enter time in seconds for which the NAS is to wait for a re-
sponse from TACACS+.
If a response is not received during the wait time, the next con-
figured TACACS+ server is queried (only if Policy =
) and the status of the current server is set to
.
The possible values are
7 System Management
), the entry with the next-
to , the default value is .
.
(default value): The TACACS+ serv-
) used for the TACACS+ pro-
to , the default value is .
87