BinTec RS353j User Manual page 533

bintec elmeg GmbH
bintec RS Series
Field
Tx Packets
Rx Packets
Signal dBm (RSSI1,
RSSI2, RSSI3)
Noise dBm
Data Rate mbps
Rx Discards
Tx Discards
VSS - Details for Connected Clients
In the Monitoring->WLAN->VSS-><Connected Client> ->
and activities of a connected client are shown. The values for wireless mode 802.11n are
listed separately.
Description
ent is logged in.
Shows the total number of packets sent.
Shows the total number of packets received.
Shows the received signal strength in dBm.
Shows the received noise strength in dBm.
Shows the current transmission rate of data received by this cli-
ent in mbps.
The following clock rates are possible: IEEE 802.11b: 11, 5.5, 2
and 1 mbps; IEEE 802.11g/a: 54, 48, 36, 24, 18, 12, 9, 6 mbps.
If the 5 GHz frequency band is used, the indication of 11, 5.5, 2
and 1 mbps is suppressed for IEEE 802.11b.
Displays the number of received data packets that have been
discarded if the bandwidth for receive traffic has been limited in
the Wireless LAN->WLAN->Wireless Networks (VSS)->
menu using the field Rx Shaping
Displays the number of data packets that were queued for
transmission and have been discarded if the bandwidth for
transmit traffic has been limited in the Wireless
LAN->WLAN->Wireless Networks (VSS)->
field Rx Shaping.
22 Monitoring
menu using the
menu, the current values
519