12 Networking
242
Field
Traffic shaping
Maximum Upload
Speed
Protocol Header Size
below Layer 3
Encryption Method
Description
Activate or deactivate data rate limiting in the send direction.
The function is enabled with
The function is disabled by default.
Only for Traffic shaping = enabled.
Enter a maximum data rate for the queue in the send direction
in kbits.
Possible values are
to
The default value is , i.e. no limits are set, the queue can oc-
cupy the maximum bandwidth.
Only for Traffic shaping = enabled.
Choose the interface type to include the size of the respective
overheads of a datagram when calculating the bandwidth.
Possible values:
•
: Value in byte.
Possible values are
to
•
value)
Can only be selected for Ethernet interfaces
•
•
•
•
Can only be selected for IPSec interfaces:
•
•
•
•
Only if an IPSec Peers is selected as Interface, Traffic shap-
bintec elmeg GmbH
.
.
.
(default
bintec RS Series