Table of Contents
Advertisement
16 VPN
374
Fields in the IP Mode and Routes menu.
Field
IP Address Mode
Default Route
Create NAT Policy
Local IP Address
Route Entries
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
(default value): You enter a static IP address.
•
device dynamically assigns an IP address to the remote ter-
minal.
•
: Only for PPTP Mode =
: Your device is dynamically assigned an IP ad-
dress.
Only if IP Address Mode =
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
The function is disabled by default.
Only if IP Address Mode =
When you configure an PPTP connection, specify whether Net-
work Address Translation (NAT) is to be enabled.
The function is enabled with
The function is disabled by default.
Only for IP Address Mode =
Assign the IP address from your LAN to the PPTP interface
which is to be used as your device's internal source address.
Only if IP Address Mode =
Define routing entries for this connection partner.
•
: IP address of the destination host or
LAN.
•
: Netmask for Remote IP Address
bintec elmeg GmbH
: Only for PPTP Mode =
.
.
: Your
bintec RS Series
Hide quick links:
Advertisement
Table of Contents
