12 Networking
236
Field
dress/Netmask
Destination Port/Range Only for Protocol =
Source IP Address/
Netmask
Source Port/Range
DSCP/TOS Filter
(Layer 3)
Description
corresponding netmask.
or
Enter a destination port number or a range of destination port
numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
Enter the source IP address of the data packets and the corres-
ponding netmask.
Only for Protocol =
or
Enter a source port number or a range of source port numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
Select the Type of Service (TOS).
Possible values:
•
(default value): The type of service is ignored.
•
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format, 6 bit).
•
according to RFC 3260 is used to signal the priority of IP
packets (indicated in decimal format).
•
Point according to RFC 3260 is used to signal the priority of
IP packets (indicated in hexadecimal format).
•
: The TOS value is specified in binary
format, e.g. 00111111.
bintec elmeg GmbH
: Enter a destination port range.
: Enter a destination port range.
: Differentiated Services Code Point
: Differentiated Services Code
bintec RS Series