Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Caution
ATM QoS should only be used if your provider specifies a list of data traffic parameters
(traffic contract).
The configuration of ATM QoS requires extensive knowledge of ATM technology and
the way the bintec elmeg devices function. An incorrect configuration can cause con-
siderable disruption during operation. If applicable, save the original configuration on
your PC.
15.2.2.1 New
Choose the New button to create additional categories.
WAN
ATM
Service Categories
Fig. 122:
->
->
The menu WAN->ATM->Service Categories->New consists of the following fields:
Fields in the Basic Parameters menu.
Field
Virtual Channel Con-
nection (VCC)
ATM Service Category
New
->
Description
Select the already configured ATM connection (displayed by the
combination of VPI and VCI) for which the service category is to
be defined.
Select how the data traffic of the ATM connection is to be con-
trolled.
A priority is implicitly assigned when you select the ATM service
category: from CBR (highest priority) through VBR.1 /VBR.3 to
VBR (lowest priority).
Possible settings:
15 WAN
315
Hide quick links:
Advertisement
Table of Contents
