BinTec RS353j User Manual page 173

bintec elmeg GmbH
bintec RS Series
Field
Client Band select
Fields in the menu MAC-Filter
Field
Access Control
Description
ively rejected when the Max. number of clients - hard limit is
reached.
The value of the Max. number of clients - soft limit must be
the same as or less than that of the Max. number of clients -
hard limit.
The default value is .
You can disable this function if you set Max. number of clients
- soft limit and Max. number of clients - hard limit to identical
values.
Not all devices support this function.
This function requires a dual radio setup where the same wire-
less networkis configured on both radio modules, but in different
frequency bands.
The Client Band select option enables clients to be moved
from the frequency band originally selected to a less busy one,
providing the client supports this. To achieve a changeover, the
connection attempt of a client is initially refused so that the cli-
ent repeats the attempt in a different frequency band.
Possible values:
•
value): The function is not used for this VSS. This is useful if
clients are to switch between different radio cells with as little
delay as possible, e. g. with Voice over WLAN.
•
ing clients in the 2.4 GHz band.
•
clients in the 5 GHz band.
Description
Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by selecting
(default
: Preference is given to accept-
: Preference is given to accepting
.
10 Wireless LAN
159