BinTec RS353j User Manual page 207

bintec elmeg GmbH
bintec RS Series
Field
Fields in the menu MAC-Filter
Field
Access Control
Allowed Addresses
Dynamic blacklisting
Failed attempts per
Time
Description
value): The function is not used for this VSS. This is useful if
clients are to switch between different radio cells with as little
delay as possible, e. g. with Voice over WLAN.
•
ing clients in the 2.4 GHz band.
•
clients in the 5 GHz band.
Description
Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by selecting
The function is disabled by default.
Use Add to make entries and enter the MAC addresses (MAC
Address) of the clients to be permitted.
You can use the Dynamic blacklisting function to identify cli-
ents that want to gain possibly unauthorised access to the net-
work and block them for a certain length of time. A client is
blocked if the number of unsuccessful login attempts with a spe-
cified time exceeds a certain number. This threshold value and
the duration of the block can be configured. A blocked client is
blocked at all the APs that are managed by the wireless LAN
controller for the VSS concerned, so neither are they able to log
into a different radio cell in that VSS. If a client needs to be
blocked permanently, this can be done in the Wireless LAN
Controller->Monitoring->Rogue Clients menu.
The function is activated by selecting
The function is activated by default.
Enter the number of failed attempts that have to originate from a
specific MAC address during a certain time for a blacklist entry
to be created.
Default values are failed attempts during
11 Wireless LAN Controller
: Preference is given to accept-
: Preference is given to accepting
.
.
seconds.
193