BinTec RS353j User Manual page 163

bintec elmeg GmbH
bintec RS Series
Field
RTS Threshold
Short Guard Interval
Fragmentation
Threshold
If is selected for Operation Mode, the following parameters are addition-
ally available under Advanced Settings:
Description
The currently selected channels are displayed here.
With Add you can add channels. If all available channels are
displayed, you cannot add any more entries.
You can delete entries with the
Here, you select how the RTS/CTS mechanism is to be
switched on/off.
If you choose
the data packet length threshold in bytes (1 - 2346) as of which
the RTS/CTS mechanism is to be used. This makes sense if
several clients that are not in each other's wireless range are
run in one access point. The mechanism can also be switched
on/off independently of the data packet length by selecting the
value or
Enable this function to reduce the guard interval (= time
between transmission of two data symbols) from 800 ns to 400
ns.
Enter the maximum size as of which the data packets are to be
fragmented (i.e. split into smaller units). Low values are recom-
mended for this field in areas with poor reception and in the
event of radio interference.
Possible values are to
The default value is
icon.
, you can specify in the input field
(default value).
.
bytes.
10 Wireless LAN
149