Table of Contents
Advertisement
3 Copy
Step 4 Starting the Copy Job
The following explains how to start a copy job.
1
Press the <Start> button.
Important • If the document has been set in the
Note
If you have more documents
If you have more documents to copy, select [Next Original] on the touch screen while
3
the current document is being scanned. This allows you to scan the documents as a
single set of data.
2
Select [Next Original] while scanning is in
progress.
Note
3
Load the next document.
62
document feeder, do not hold down the
document while it is being conveyed.
• Copies cannot be made if a copy
protection code is detected. For
information about a copy protection code,
refer to "Secure Watermark (Managing
Document Security)" (P.116).
• If a problem occurs, an error message
appears in the touch screen. Solve the
problem in accordance with the message.
• You can set the next job during copying.
• When using the document feeder, load
the next document after the machine has
finished scanning the first document.
• When [Next Original] is displayed and no
operation is performed during a certain
period of time, the machine automatically
assumes that there are no more
documents.
• You can change the number of copies by
selecting [Change Quantity...], which is
displayed when you select [Next Original].
1
2
3
4
5
6
7
8
9
0
#
C
<Start> button
Advertisement
Table of Contents
