When Not Using A Receiver - Xerox ApeosPort-III C7600 User Manual

When Not Using a Receiver

1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "5 Tools" > "Common
Service Settings" > "Audio Tones" > "Line Monitor Volume" in the Administrator Guide.
2
Select [On-hook (Manual Send/Receive)] on
the [More Options] screen.
3
Select [Manual Receive] from the drop-down
menu.
4
Specify the fax number of the facsimile
information service.
The call destination can be specified using
the numeric keypad address numbers, or
one touch buttons. The address book cannot be used.
The call destination can also be specified using the keyboard displayed on the
screen.
Note • When the line type is set to a pulse line, [Tone (:)] does not appear. If you want to send tones
• Some touch-tone services may not be available even if you set your telephone to send
5
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6
When input is finished, press the <Start> button.
(or to use the touch-tone services) while using a pulse line, select [Tone (:)]
tones.
Facsimile Information Services
4
205