Xerox ApeosPort-III C7600 User Manual page 117

[Stored Watermarks] Screen
Select the text to print on the copy.
1
Select [On].
2
Select any text.
Off
No text is printed.
On
Text is printed. You can select the text used for watermark. You can specify text from
3 preset texts or the text set in the System Administration mode.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Watermark"
> "Custom Watermark 1 to 3" in the Administrator Guide.
[Watermark Effect] Screen
You can set Text Effect on this screen.
If you enable the Text Effect feature, the text strings specified in [Control Number],
[Text], [User Account Number], [Date & Time], and [Serial Number] on the [Watermark]
screen are embedded in the background of each copy. When the copy is copied again,
the text embedded in the background is printed as embossed or outline text depending
on the option you select on the [Watermark - Text Effect] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
1
Select any item.
Off
Disables the feature, and prints text as it is.
Embossed
Enables the feature. When the copy is copied again, the text embedded in the
background of the copy is printed as embossed text.
Outline
Enables the feature. When the copy is copied again, the text embedded in the
background of the copy is printed as outline text.
You can also set the character size, density, and other watermark print settings in the System
Administration mode. For information about other advanced settings, refer to "5 Tools" > "Common
Service Settings" > "Watermark" in the Administrator Guide.
information, contact our Customer Support Center.
Output Format
3
115