Xerox ApeosPort-III C7600 User Manual page 78

3 Copy
Source Color
The [Source Color] screen is displayed.
Refer to "[Source Color] Screen" (P.76).
Target Area Color
The [Target Area Color] screen is displayed.
Refer to "[Target Area Color] Screen" (P.76).
Non-target Area Color
The [Non-target Area Color] screen is displayed.
Refer to "[Non-target Area Color] Screen" (P.77).
Single Color
The [Output Color - Color] screen is displayed.
Refer to "[Output Color - Color] Screen" (P.77).
[Source Color] Screen
3 This screen allows you to select one or more colors from your document to define them
as source colors.
1
Select [Dual Color].
2
Select [Source Color].
3
Select [Other than Black] or [Color].
4
If you selected [Color] in Step 3, select the
desired source colors.
Other than Black
The colors other than black will be the source
colors.
Color
Allows you to select one or more source colors from six preset options.
[Target Area Color] Screen
This screen allows you to select the target color to be used in place of the selected
source colors. Available options are seven preset and six custom options.
For information about how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom
Colors" in the Administrator Guide.
1
Select [Dual Color].
2
Select [Target Area Color] copy service
settings.
3
Select a color.
76