2
Select [Change Quantity...].
3
Set the number of copy sets with the numeric keypad. The new quantity must include
the number of copies that have already been printed. You cannot enter a number less
than the number of copies that have already been printed.
4
Press the <Start> button.
Note
• If you enter the same value as the number of copies that have already been printed, the
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
Important • Press the <Interrupt> button only after all the documents have been scanned. The machine
1
Press the <Interrupt> button.
The interrupt indicator lights up to indicate
that the machine is in the interrupt mode.
2
Load a document and set features if
necessary.
3
Set the number of copy sets with the
numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
The interrupt indicator goes out to indicate that the interrupt mode is exited.
Note
• If you used the document glass to copy the document, remove the document from the
6
Press the <Start> button. The suspended copy job is resumed.
machine will not execute a copy job even when you press the <Start> button.
does not accept another job while it is scanning the documents, or [Next Original] is being
selected.
document glass.
Operations during Copying
1
2
3
4
5
6
7
8
9
0
#
C
<Interrupt> button
3
67