Table of Contents
Advertisement
3 Copy
1
Use [
width ratios.
Width X/Length Y
Set the height and width ratios within the range from 100 to 400% in 1% increments.
Lock X - Y%
You can simultaneously change the numerical values of the height and width by the
same amount.
Repeat Image (Making Multiple Copies on One Sheet)
3
This feature allows you to copy a document image on one sheet of paper repeatedly
for a specified number of times.
When the copy ratio is set to [Auto], the repeated copies of the image are reduced to
fit on the selected paper. You can also specify how the repeated copies of the image
are arranged.
Note
1
Select [Repeat Image].
2
Select any item.
Off
Disables this feature.
Auto Repeat
Automatically determines the number of copies according to the document size, paper
size, and copy ratio, and then repeatedly copies the document image onto the paper.
Note
Variable Repeat
Specify how many copies to place along each of the long and short edges of paper.
You can specify a value between 1 and 23 for the length in the Y direction and a value
between 1 and 33 for the length in the X direction.
106
] and [
] to specify the height and
• When making copies at the same size as the document image, specify a number of repeats
so that the copies fit on the paper.
• If [Auto Paper Select] is set for [Paper Supply], the tray specified in [Auto Paper Off] is
automatically selected. Change the settings if necessary. For information on [Auto Paper
Off], refer to "5 Tools" > "Copy Service Settings" > "Copy Control" in the Administrator
Guide.
• Copies cannot be made when the document image is larger than the specified paper size.
Advertisement
Table of Contents
