Table of Contents
Advertisement
2 Product Overview
D-Finisher with Booklet Maker
2
No.
Component
1
Tray 8 (Interposer)
2
De-curl button
3
Output tray
4
Finisher tray
5
Booklet output tray
6
Booklet output tray button
7
Right cover
8
Staple cartridges for
booklet
9
Staple scrap container
10
Staple cartridge
11
Punch scrap container
44
14
13
12
11 10
Load paper for covers or separators. Paper loaded here is not used for
copying or printing.
Press this button to decurl copies.
Receives copies when you select [Auto], [Collated], or [Uncollated].
Receives stapled, punched and Z-folded copies.
Receives copies when you select [Fold Only] or [Fold & Staple].
Press this button to deliver booklets to removal position.
Open this cover to clear paper jams, replace a staple cartridge, or
remove jammed staples or punch scraps.
Two staple cartridges for booklet. Remove these cartridges when
replacing them with new ones, or when clearing staple jams.
Receives scraps from the stapler. Take this container out when
replacing it with a new one.
Contains staples. Take this cartridge out when replacing the cartridge
with a new one, or when clearing staple jams.
Holds punch scraps. Take this container out when removing scraps.
1
2
9
8
7
Function
3
4
5
6
Advertisement
Table of Contents
