Mixed Sized Originals (Scanning Different Size Documents Simultaneously) - Xerox ApeosPort-III C7600 User Manual

Hide thumbs Also See for ApeosPort-III C7600:
Table of Contents

Advertisement

Note
• When a document size cannot be detected automatically, a message appears prompting
Sizes that can be detected automatically vary depending on the settings made on "Paper Size Settings" in
the System Administration mode. For information on the document sizes that can be automatically
detected, refer to "5 Tools" > "Common Service Settings" > "Other Settings" > "Paper Size Settings" in
the Administrator Guide.
Standard Size
Select the original size from preset sizes.
You can change the default options. For more information, refer to "5 Tools" > "Fax Service Settings" >
"Original Size Defaults" in the Administrator Guide.
Mixed Sized Originals (Scanning Different Size Documents
Simultaneously)
When using the document feeder, you can simultaneously send different size
documents with the sizes matching the respective sizes of the documents. You can
also specify the size of the paper so that faxes are sent at the same paper size.
Important • Always load the A5-size documents in portrait orientation.
• When loading B5 documents together with A3 documents loaded in landscape orientation or
• Originals may not be scanned correctly if the top-left corners are not aligned properly.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
Note
• Be sure to set [Original Size] on the [Layout Adjustment] screen to [Auto Detect], when using
1
Select [Original Size] on the [Layout
Adjustment] screen.
2
Confirm that [Auto Detect] is selected and
select [Save]. If [Auto Detect] is not set,
select [Auto Detect], and then select [Save].
3
Select [Mixed Sized Originals].
4
Select [On].
Off
Select this item when all documents are of
the same size.
On
When scanning documents of different sizes,
the machine automatically detects the size of each document.
you to enter the document size.
A4 documents loaded in portrait orientation, load B5 the documents in portrait orientation.
portrait and B4 landscape. If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle and may not be scanned properly.
mixed sized documents.
Layout Adjustment
4
169

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-iii c5500Docucentre-iii c6500

Table of Contents