Change Settings - Xerox ApeosPort-III C7600 User Manual

3 Copy
Booklet Creation
For information on the feature, refer to "Booklet Creation (Creating a Booklet)" (P.98).
Covers
Important • The machine does not copy on a cover when using the Build Job feature.
For information on the feature, refer to "Covers (Attaching Covers to Copies)" (P.101).
Annotations
For information on the feature, refer to "Annotations (Adding a Comment / a Date / Page Numbers to
Copies)" (P.107).
Segment Separators
For information on the feature, refer to "[Segment Separators] Screen" (P.129).
Watermark
For information about the feature, refer to "Watermark (Printing Control Numbers on the Background of
Copies)" (P.113).
3
Secure Watermark
For information about the feature, refer to "Secure Watermark (Managing Document Security)" (P.116).
Face Up/Down Output
For information about the feature, refer to "Face Up/Down Output (Specifying Face Up or Down)"
(P.118).
[Copy Job] screen
The following describes the screen that appears while the Build Job is being executed.

Change Settings...

Displays the [Copy] screen allowing you to change the settings. After changing the
settings as necessary, press the <Start> button on the control panel to start scanning
of the document. If you want to return to the previous screen, press the < # > button.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored
program.
1) Select [Change Settings...].
2) Select the [Job Assembly] tab.
3) Select [Stored Programming].
4) Select the number of the stored program that contains the features you wish to use.
For information on how to register a stored program, refer to "Registering Stored Programs for Build
Job" (P.291).
128