Table of Contents
Advertisement
3 Copy
Off
Adds no prefix text or page number.
Bates Stamp
Adds prefix text and page numbers to copies.
Stored Prefixes
Allows you to use the screen keyboard to enter prefix text up to 16 characters.
Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can select whether to specify the number of digits to be used for page numbers.
Select from [Auto Assign] and [Manual Assign]. If you select [Manual Assign], you can
specify the number of digits between 1 and 9 digits in 1 digit increments.
Apply To
Displays the [Apply Bates Stamp To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.112).
3
Position
Displays the [Bates Stamp - Position] screen.
You can select a prefix and page-number position from six options.
You can also select a stamp position on Side 2 from [Same as Side 1] or [Mirror Side 1].
Font Size
Displays the [Bates Stamp - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly
specify a size in the range of 6 to 24 points in 1 point increments.
[Apply Bates Stamp To] Screen
This screen allows you to specify a page range to add prefix text and page numbers.
1
Select any item.
All Pages
Adds prefix text and page numbers to all pages.
Starting Page Number
Allows you to specify the start page to add prefix text and a page number, in the range
of 1 to 9999.
Note
112
• Use [
] and [
], or the numeric keypad and enter the start page number.
Advertisement
Table of Contents
