Table of Contents
Advertisement
Left & Right (Left/Right)
Erases the shadows of left and right edges of the document in accordance with the
orientation of the loaded document. You can set the edge erase width within the
range from 0 to 50 mm in 1 mm increments.
Center
Erases the shadow in the center of facing pages of a bound document. You can set
the binding erase width within the range from 0 to 50 mm in 1mm increments.
Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note
• If the [Original Orientation] differs from the actual document orientation, then the machine
Upright Images
Select this item when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this item when placing the top edge of the document against the left side of
the document glass or document feeder.
2 Sided Original - Side 2
Appears when [Edge Erase] is selected.
Set whether the same value is set to the edge erase amount of Side 1 and Side 2.
Same as Side 1
The same value is set to the edge erase amount of Side 1 and Side 2.
Mirror Side 1
The edge erase amounts of Side 1 and Side 2 are set symmetrically.
Image Shift (Adjusting the Image Position)
This feature allows you to shift the position of document images so that the images are
placed on the left, right, top, bottom, or center of paper. You can also adjust the
amounts of the left, right, top, and bottom margins. If you make 2-sided copies, you can
adjust the image positions for [Side 1] and [Side 2] individually.
Important • Ensure that the orientation of the document and the [Original Orientation] setting are the
Note
• The settings made for the Image Shift feature are set in accordance with paper. They are not
1
Select [Image Shift].
2
Select any item.
may mistakenly detect the top of the document.
same.
affected by the Reduce/Enlarge settings.
Layout Adjustment
3
91
Advertisement
Table of Contents
