Xerox ApeosPort-III C7600 User Manual page 123

1
Select [Copy Output].
2
Select any item.
Auto
According to the set feature used, the machine automatically selects [Collated] or
[Uncollated].
Copies are collated when any of the following features is used: auto document feeder,
2 Sided Book Copy, Covers, [Blank Separators & Handouts] or [Transparency Set &
Handouts] of Transparency Separators, Booklet Creation, Stapling, Build Job, Sample
Set, and Combine Original Sets.
When you do not use any of the above-described features, copies are not collated.
Collated / Stapling / Punching
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts
sheets by page.
Separator Tray
When you selected [Uncollated with Separators], select the paper tray to use for the
separators.
When [5] is selected, the [Tray 5] screen appears. For more information, refer to "[Tray 5] Screen"
(P.73).
Staple
Sets the position for stapling. Finisher C/Finisher C w/Booklet is capable of stapling
about 2 - 50 sheets of paper (when P paper or J paper is used). D-Finisher with Booklet
Maker is capable of stapling 2 - 100 sheets of paper (when P paper or J paper is used).
Available paper types are: plain paper (64 - 82 gsm), plain paper (Thicker) 83 - 105
gsm, recycled paper (64 - 82 gsm), recycled paper (Thicker) 83 - 105 gsm, plain reload
paper, heavyweight 1 (106 - 176 gsm), heavyweight 1 (Side 2), heavyweight 2 (177 -
280 gsm), coated 1 (106 - 176 gsm), coated 1 (Side 2), punched paper, tab stock (106
- 176 gsm), and custom paper 1 to 5.
D-Finisher with Booklet Maker cuts the staple nails depending on the number of sheets.
The stapled nails may be bent depending on the type of paper used.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
• In the following cases, the actual stapling position is different from the stapling position
appearing on the screen:
When [Original Orientation] is set to [Upright Images], and [Staple] is set to one position at
the right side.
When [Original Orientation] is set to [Sideways Images (Top to Left)], and [Staple] is set to
one position at the left side.
Output Format
3
121