Table of Contents
Advertisement
3 Copy
1 Sided Covers - Print Outside
The first page of the document is copied on the front side of the cover.
Last Page on Back Cover
Selecting this check box copies the image of the last document page onto the last page
of the copy sheets as a back cover. When you use [Divide Output] to divide a booklet
into subsets, the image of the last document page will be copied onto the last page of
the last subset.
Note
Binding Shift
Displays the [Booklet Creation-Binding Shift] screen.
Refer to "[Booklet Creation-Binding Shift] Screen" (P.100).
Divide Output
Displays the [Booklet Creation-Divide Output] screen.
Refer to "[Booklet Creation-Divide Output] Screen" (P.101).
3
Fold & Staple
Displays the [Booklet Creation - Fold & Staple] screen.
Refer to "[Booklet Creation-Fold & Staple] Screen" (P.101).
Note
Paper Supply
Displays the [Booklet Creation - Paper Supply] screen.
Select the tray to be used for body pages from [Main Body Tray], and the tray for cover
pages from [Cover Tray]. The orientation and size of paper loaded in the trays must be
the same.
When [5] is selected, the [Tray 5] screen appears. For more information, refer to "[Tray 5] Screen"
(P.73).
[Booklet Creation-Binding Shift] Screen
You can set the binding shift value within the range from 0 to 50 mm in 1 mm
increments.
1
Use [
specify a binding shift value.
100
• Depending on the number of pages in the original, a blank page may be added before the
last booklet page.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
] and [
] or numeric keypad to
Advertisement
Table of Contents
